NG Series Mini 600 - Free Fall
Suitable for boats from 4 – 6 metres
- Fits neatly into the anchor well
- The motor can be mounted at 30, 45 and 90 degrees to suit the configuration of the anchor well
- 600 watt motor
- Constructed from 316 marine grade stainless steel
- Maximum lifting capacity 195 kilos (when the drum diameter is small)
- Holding capacity at anchor is 1800 kilos
- Rated to 80 amps
- Normal running the Stress Free will use 25 – 30 amps and under load up to 55 amps
- To protect the motor, the circuit breaker will trip out if there is a power overload (for example the anchor is stuck on the bottom)
- Recommend dual batteries with the battery switch on BOTH
- Can be deck mounted
The gearbox mounting holes in the mounting bracket allow the motor and drive to be installed at 4 angles to suit different anchor well configurations. Another 8 adjustment angles are available at 30º and 45º from each of the basic 4 mounting holes.
Drum capacity
- 70 meters of 8mm nylon plus 6 metres of 6mm shortlink chain OR
- 80 meters of 6mm double braid eye spliced to 5 meters of 8mm nylon and 6 meters of 6mm shortlink chain
NB: (the motor cannot be mounted in the horizontal position to face the baseplate).
NB: The amount of chain can be lengthened or shortened to meet individual needs. In these situations the amount of rope must be tailored to ensure there is a maintained clearance between the chain and the baseplate.
 |
|
 Click here to download specification drawings for the mini anchor winch. |
 |
|
|
| Click here to download the manual for the anchor winch. |
|
|
|
| Go back to main NG Series Stress Free boat winch page |
|