NG Series Midi 1400
NG Series Midi 1400 - Free Fall
The NG Series Midi 1400 is a light weight version of the NG Series Maxi 1400 and manufactured to suit boats 6 meters to 7 meters where the design of the anchor well is too small for the NG Series Maxi 1400.
- 1400 watt motor
- All 316 marine grade stainless steel
- Baseplate 6mm marine grade stainless steel and pressed
- Diameter of the drum 300mm
- Maximum lifting capacity 250 kilos (when the drum diameter is small)
- Holding capacity at anchor is 1800 kilos
- Rated to 135 amps
- Normal running the Stress Free will use 25 – 30 amps and under load up to 55 amps
- To protect the motor, the circuit breaker will trip out if there is a power overload (for example the anchor is stuck on the bottom)
- Recommend dual batteries with the battery switch on BOTH
- Can be deck mounted
Drum Capacity:
- 65 metres of 10mm nylon plus 8 metres of 8mm shortlink chain OR
- 90 metres of 8mm nylon plus 8 metres of 8mm shortlink chain OR
- 160 metres of 6mm double braid eye spliced to 5 metres of 8mm nylon plus 8 metres of 8mm shortlink chain
The gearbox mounting holes in the mounting bracket allow the motor and drive to be installed at 4 angles to suit different anchor well configurations. Another 8 adjustment angles are available at 30º and 45º from each of the basic 4 mounting holes.
NB (the motor cannot be mounted in the horizontal position to face the baseplate)
 |
|
 Click here to download specification drawings for the midi anchor winch. |
 |
|
|
| Click here to download the manual for the anchor winch. |
|
|
|
| Go back to main NG Series Stress Free boat winch page |
|